27
b) Setting the ‘HMS 100 Z’ to the maintenance mode
You only need to set this, if the smoke detector is operated as part of the ‘HMS
100’ system!
• In normal operation press the ‘
MENU
’ button. ‘
Störungen bearbeiten
Störungen bearbeiten
Störungen bearbeiten
Störungen bearbeiten
Störungen bearbeiten
’ appears
on the display.
• Use the scroller or the ‘
x
’ or ‘
w
’ buttons to select the ‘
Sensor einstellen
Sensor einstellen
Sensor einstellen
Sensor einstellen
Sensor einstellen
’ menu
item.
• Press the ‘
OK
’ button.
• Use the scroller or the ‘
x
’ or ‘
w
’ buttons to select the ‘
Sensor warten
Sensor warten
Sensor warten
Sensor warten
Sensor warten
’ menu item.
• Press the ‘
OK
’ button.
• Now you can use the ‘
x
’ or ‘
w
’ buttons to limit the sensor selection to the ‘Rauchmelder’
(smoke detector) sensor type. The other sensors are then removed from the symbol line.
• Then use the scroller to select the desired sensor/smoke detector.
• Press the ‘
OK
’ button.
• ‘
Sensorsuche
Sensorsuche
Sensorsuche
Sensorsuche
Sensorsuche
’ appears with the name of the sensor concerned below it.
• Now replace the batteries in the smoke detector as described in section 13 c).
• Then quit the maintenance mode. See section 13 d).