background image

4

2. Prescribed use

The wireless door/window detector ‘FAZ 3000-TF-2’ is only suitable for use with
the ‘FAZ 3000’ wireless alarm system.

The door/window detector has a magnet contact. A signal is transmitted to the
alarm base station when it is triggered.

Inside the door/window detector there is an option to connect wired NC and/
or NO contacts.

The door/window detector features an internal sabotage contact that immedi-
ately sets off an alarm at the alarm base station if a meddler opens the casing
of the device.

Batteries must be used for the power supply.

Installation and operation of the wireless door/window detector is only suitable
for dry indoor areas. Make sure that the device does not get damp or wet!

Any use other than the one described above may damage the product and can
also increase the risk of short-circuit, fire, electric shock, etc.

No part of the product may be modified or adapted. The device may only be
operated when its casing is fully closed.

All the safety instructions and installation notes in this user
manual must be observed without fail.

3. Scope of delivery

• ‘FAZ 3000-TF-2’ radio door/window detector

• Magnet

• Assembly material

• User manual

Summary of Contents for 75 03 35




























Reviews: