14
8. Registering the door/window detector
‘FAZ 3000-TF-2’ with the base station
To register the sensors the alarm base station must first be set
to receive radio signals. Make sure that you also read the user
manual of the ‘FAZ 3000-Z’ alarm base station.
Carry out the following steps on the ‘FAZ 3000-Z’ alarm base station:
Description of procedure
Display on LCD
• The alarm base station must be in the top level. The
LCD should appear as on the right, for example, with
the time and the date.
• Briefly press the ‘
Menü a/A
’ button on the control
unit of the ‘FAZ-Z’ alarm base station.
• Use the ‘
y
’ and ‘
z
’ buttons to select the ‘
sensors
sensors
sensors
sensors
sensors
’
menu.
• Confirm your selection by briefly pressing the ‘
OK
’
button. ‘
sensors add
sensors add
sensors add
sensors add
sensors add
’ appears on the LCD.
• Press the ‘
OK
’ button again.
The ‘
X
X
X
X
X
’ character here stands for the number of
sensors that have already been registered
plus one.
Now the alarm base station is ready to receive the registration of
the ‘FAZ 3000-TF-2’ door/window detector.
• Go to the door/window detector that you wish to register with the alarm base
station.
sensors
disarm
16:30 14.12
troubles
sensors
add
sensor X
clear
