16
• If you have connected additional NO contacts to the ‘KL1’ connector (see
figure 3 on page 10), please insert 3 type ‘LR44’ button cells observing correct
polarity into the battery compartment, see figure 7.
The 3 button cells must be positioned such that each ‘plus’ (‘+’) points upwards
(please note the ‘+’ symbol on the circuit board in the battery compartment;
the lettering on the button cells).
Please note:
The ‘KL1’ connection for NO contacts is always
active, irrespective as to whether ‘disarmed’,
‘internally armed’ or ‘externally armed’ is set.
This is ideal, if glass break sensors with NO
contacts are used. An alarm is set off imme-
diately when a pane of glass is smashed!
If the glass break detector has a polar-
ity specification, attach the ‘plus’ con-
tact to the left KL1 screw terminal (see
figure 5).
• Close the door/window detector’s cas-
ing, so that the two locking hooks au-
dibly click in.
Figure 7
TA1
KL2
KL1
D1
+
-
+
-
+
-
+
-
+
-
+
-
+
-
