34
At tool change, maintenance or cleaning, as well as during transport or storage, the on/off switch (11) must
be blocked with the rotating direction switch (4) for reasons of safety. There is a danger of injury in case of
accidental actuation of the on/off switch (11)!
Switch the rotating direction only when the drive of the cordless impact screw driller has stopped com-
pletely! Otherwise, the drive may be damaged.
d) Slider for Two-Speed Gear
At the top of the cordless impact screw driller, there is a slider (3) for selec-
tion of the two speeds of the integrated two-speed gear.
A 1st gear, low speed (0 - 450 rpm), high torque
B 2nd gear, high speed (0 - 1600 rpm), low torque
The slider for selection of the two gears must only be actuated
when the drive of the cordless impact screw driller has stopped
completely! Otherwise, the drive may be damaged.
If one of the gears cannot be engaged when the slider is pushed,
the drive sprockets may be placed badly towards each other.
In this case, push the on/off switch slightly so that the sprockets
will move a little way. Then you should be able to use the slider.
e) On/Off Switch with Rotating Speed Control
In order to operate the on/off switch (11), the rotating direction switch (4) must not be in the middle position
(in this position, the on/off switch is blocked; activation lock).
The rotating speed of the drive depends on how far the on/off switch (11) is
pushed in (B). This permits smooth adjustment of the speed from standstill
to maximum speed.
When releasing (A) the on/off switch, the drive will be braked to the stop
("rotating stop").
When the on/off switch (11) is pushed, the LED (10) will be acti-
vated automatically to permit lighting of the working position.
If you only push the on/off switch very slightly, the LED will be
activated without the drive running. This way you can, for exam-
ple, place a screw precisely before screwing in.
At tool change, maintenance or cleaning, as well as during transport or storage, the on/off switch (11) must
be blocked with the rotating direction switch (4) for reasons of safety. There is a danger of injury in case of
accidental actuation of the on/off switch (11)!