3.
Operation
This section shall provide you with an overview of the operation of the IR-CTRL and the associated
components. The necessary detail information can be taken from the following sections which inclu-
de information sheets and sample programs.
3.1 Connection of components
The IR-CTRL is ready for operation, after it is connected over the interface with the control computer
and plugged into a power supply.
Figure 1
· Connect the SDA and SCL interface lines to the control computer.
If the control computer is a component of the C-Control series, the the violet line (SDA) must be
connected to Port 1 and the pink line (SCL) to Port 2.
3 SDA
violet
4 SCLpink
· Connect the IR-RMT to the power supply.
Caution: It is important to ensure right polarity of connections!
Incorrect polarity can result in the destruction of the sensor.
1 +12V red
2 GND black
15
English
Summary of Contents for IR-CTRL
Page 2: ......
