www.connects2.com
www.
aerpro
.com
10
INSTALLATION/SPECIFICATIONS
Coding and decoding of rear-view camera (Porsche Cayenne Only)
The rear-view camera can be coded or decoded via the loose white cable in
connection with Dip3 of the Interface.
Dip
Function
ON
OFF
Dip 3 Rear-view camera
Coding
Decoding
1.
Turn on ignition
2.
Wait until the head-unit has booted up
3.
Set Dip3 and Dip4 of Interface (depending on the desired coding/
decoding)
4.
Put +12V for 5 sec. to the white cable
5.
During configuration the red and blue LED will flash
inside the CAN-box (visible at the male 8pin Molex connector).
The PCM will reset after 5-10 seconds
6.
The red and the blue LED inside the Interface will light up and the
notice “Rear-view camera“ or “ParkAssistant” will appear in the
menu after successful coding (or disappear after successful
decoding)
Activation of Video-In-Motion Functionality
With Dip1 set to “ON”, the video-in-motion function is activated permanently
