10
Note:
If any of the above items is found missing or damaged, please contact
your local sales representative for support or replacement.
2.3 Installing the Managed Industrial Gigabit
Ethernet Switch
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface, such as a metal panel.
DIN-Rail
STEP 1
:
Insert the top of the
DIN-Rail into the slot just below the
metal spring
STEP 2
:
The DIN-Rail attachment
unit will be snapped into place as
shown
Wall Mount (Optional)
Use a wall mount with two screws to install the Managed Industrial Gigabit
Ethernet Switch on the wall by a screwdriver. The Managed Industrial Gigabit
Ethernet Switch is able to be installed in either vertical or horizontal direction for
users need by a wall mount. The examples are shown in Figure 6 and 7.
Metal
Spring
DIN-Rail
DIN-Rail
Metal
Spring
