14
Note:
If there is no power redundancy, the relay alarm is not available.
Figure 9.
Illustration of wiring the terminal blocks
2.5 Connecting the switch to Network
Connect to Network
This Managed Industrial Gigabit Ethernet Switch has 2 uplink ports (RJ-45 or
SFP) and 8 downlink 10/100/1000Mbps RJ-45 ports for you to implement it in
your Industrial environment. All RJ-45 ports can be inserted by
10/100/1000Base-T cables, connecting to the end devices. The fiber port(s) can
accept any kind of connector with proper SFP transceiver (mini-GBIC).
3. OPERATION
The Managed Industrial Gigabit Ethernet Switch is Plug & Play. Real-time
operational status can be monitored through a set of LED indicators located on
the front panel. A built-in management module provides users with flexible
interfaces to configure, control and monitor the complete system remotely.
Relay
Insert positive
or negative
wire
Use a flat-head
screwdriver to
loosen and
tighten the
screw
