Vpot-30 iPBX
- System Manual
4.3
Email Setup
Email Setup is for setting the X200E server's email sending account and corresponding
recipient for system alert. System alert including daily system log, hard disk failure, etc..
SMTP Server – Address of SMTP server used by X200E server to send email.
SMTP Account – Account name for SMTP server if applicable.
SMTP Password – Account password for SMTP server if applicable.
Server Email – X200E server's own email address, sender address.
Admin Email – Destination email address for system alert.
Send Test Email – Send a test email to Admin Email to test the above setup is valid.
4.4
NAT Setup
NAT Setup is for setting the X200E server's VoIP service to pass through the NAT
function.
External IP Address – The WAN IP address of system LAN. That is the IP address
obtained from ISP.
Local IP Addresses – The system LAN IP address range. It should be entered in the
ip_address/mask syntax. e.g. 192.168.0.0/24
Figure 16: Email Setup
14
Figure 17: NAT Setup
