Connected Essentials CES-10, Owner'S Manual

Page: 4 / 5

Some common problems are also listed below.
NO SOUND
No sound may be caused by one or more of the following:
• No power - Ensure the AC adaptor is fully inserted into the main splug socket and to
the power connection input on the transmitter and speakers.
• Not switched on - ensure the speakers are switch ON.
• Speaker’s battery capacity is too low -, replace with new batteries or connect the AC
adaptors to the speakers.
• No source - ensure your connected audio equipment is ON and is operational.
• The volume of speakers is too low - adjust the volume to an appropriate level.
DISTORTED SOUND
• Need to re-scan - press the “AUTO-TUNE” button on the speakers until a clear sound
is heard.
• Need to change channels - change the position of the channel selector on the
transmitter and then press the “AUTO TUNE” button on the speakers.
• Battery capacity is too low - replace with new batteries or use the supplied AC adapters.
• Ensure the volume level of speakers is adjusted properly.
• The speakers are too far away from the transmitter, move them closer.
• The input level of the audio signal is too low. Turn up the volume of the audio
source equipment.
If you are still having trouble with your system, you can call our help line on 0871 2002276
(Mon-Fri, 9.00am – 5.30pm, except public holidays, calls are charged at national rate).
SPECIFICATIONS
Transmission Mode : UHF stereo
Carrier Frequency : 863 MHz
Operation Voltage : Transmitter, DC 12V 200mA
Speaker, 6 X ‘AA’ size Alkaline batteries
or DC 12V 500mA adaptor
Frequency Response : 20Mz - 13KHz
Distortion : 1.5%
S/N Ratio : 50dB
Channel Separation : 30dB
Operation Distance : Up to 100M (Open Area)
6
Warning :
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired
operation of the device.
The device must be used accompany with the provided AC/DC adapter.
The provided AC/DC adapter shall always remain readily operable.
Please use the device in normal indoor environment.
The ventilation should not be impeded by covering the ventilation openings with items
such as newspapers, table-cloths, curtains, etc.
This device shall not be exposed to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on or near this device.
Licence
This Connected Essentials RF product conforms with the European R&TTE directive for
RF systems in harmonised frequency ranges. These systems may be sold and operated
in the EU and in EFTA countries.
Operation is not permited in countries not named.
The declaration of conformity is available from www..easidirect.co.uk
WEEE Directive
Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL OF 27th
January 2003 on waste electrical equipment.
Products that include the WEEE symbol, show below, should not be placed in the normal
house hold rubbish, but should be disposed of using the appropriate WEEE disposal
facility. These facilities may be advised to you by your local council or the organization
from which the product(s) was purchased.
For the latest information on the WEEE Directive please access the
following url http://www.dti.gov.uk/sustainability/weee or telephone
Envirowise on 0800 585794
7