Connected Essentials CES-10, Owner'S Manual

Page: 2 / 5

Plug the AC adaptor in the mains wall socket and connect the
audio plug from the transmitter to the audio source. As soon as
the transmitter is receiving the audio signal, it will automatically
switch on and the red LED will illuminate.
Setting Up The Speakers
1. The speakers can be powered
by batteries (not supplied) or from
a mains volt supply.
• If using batteries Insert 6 x ‘AA’
size ALKALINE batteries into
each of the speakers battery
compartments. Ensure the
correct polarity is used when
inserting the batteries.
• If using the supplied 12V power
adaptor connect the power
adaptor to the DC input jack on
the rear of each speaker, then
plug it to the wall AC outlet.
3
Introduction
This stereo wireless speaker system uses the latest wireless technology that enables you
to enjoy music and TV sound anywhere inside or outside your home. You can simply
connect the system to any audio source such as Radio, TV, VCR, Hi-Fi and
CD/MP3/VCD/DVD player without complicated wiring and installation. You’ll enjoy
thrilling, lifelike sound stereo sound in minutes.
Features
• 863 MHz RF technology speaker system giving an operating distance of up to 100m
(in ideal conditions) with no line of sight limitation – giving you virtually
interference-free stereo quality sound reproduction.
• Phase Lock Loop (PLL) technology on transmitter to maintain accurate tuning of your
system
• RF technology lets you roam freely throughout your house, garden (within stated
operating distance).
• Auto tuning function – speakers will scan for best signal from your receiver.
• Bass boost function – enhance the bass sound depending on your own music preferences
• Add additional speaker sets to the one transmitter – ideal for surround sound systems
Contents
• 2 x Speakers • Transmitter • 3 x mains adapters • Aerial tube
• 6.3mm stereo adapter & 3.5mm to left/right RCA phono plugs • Owners manual
Getting Started
Setting Up The Transmitter
1. Insert the antenna wire into the antenna tube.
2. PlugConnect the supplied AC power
adaptor into an electrical wall
socket.
3. Plug the AC power adaptor in the
input socket located on the rear of the
transmitter.
4. The rear of the transmitter has an
audio cord that can be plugged into the
audio output socket of a TV, monitor,
video, radio recorder, CD/MP3/VCD or
/DVD players or to any 3.6mm
headphone/earphone socket with the connector provided. If your system has a 6.3mm
socket or stereo outputs please use the additional adaptors provided
2