Connected Essentials CES-10, Owner'S Manual

Page: 3 / 5

2. Switch on the speaker by turning up the VOLUME ON/OFF knob towards the ON
direction. The POWER/STEREO LED will light up. Switch off the speaker by turning
down the VOLUME ON/OFF knob towards the OFF direction until a “click” sound is heard.
OPERATION
1. Turn on the audio source (TV or audio component) to
which the transmitter is connected to. The LED on the
transmitter will light up.
2. Select the channel 1 or 2 on the transmitter. You may
need to try each one in turn for the best
performance in your location.
3. Turn on the ON/OFF VOLUME knob on the speakers
and adjust the volume to the desired listening level.
4. Push the “SCAN” auto-tuning button to get the best tuning reception for the speakers.
4
When the button is pressed, frequency tuning starts automatically and it stops when a
signal is detected. The POWER/STEREO LED will change from red to green.
Tips for Clear Reception
A). Keep a distance of up to 7 meters between the transmitter and the speakers, and then
press “SCAN” auto-tuning button for best tuning reception.
B) If you hear interferenace, move the channel selector switch from one channel to the
other (there are two channels for selection) on the transmitter, and then press the “SCAN”
auto-tuning button again.
Bass Boost
The BASS BOOST button can be used to
enhance the bass sound depending on your own
music preferences. Turn on the bass boost effect
by pressing the BASS BOOST button down. Turn
it off by pressing the button again.
Note
You should now be able to move the speakers
freely from room to room without interference.
Should there be any interferance (the signal
breaks, cuts off or carries distortion), press the speaker’s “SCAN” auto-tuning button to
maximize the best reception.
If you hear interference from other components, you can re-adjust the tuning by changing
between either channel 1 or, 2 of the transmitter, then
pressing “SCAN” auto-tuning button for best reception.
The signal from the system will become weaker when transmitting / receiving over longer dis-
tances. Remember, the maximum range of 100 metres is in ideal conditions. Walls, furni-
ture and so on between the transmitter and speaker(s) will reduce the transmission range.
Switching off
1. Turn the VOLUME ON/OFF knob until the click sound is heard to turn off the speaker
and the LED light goes off
2. For protection of the transmitter and power saving, the transmitter will cut off
automatically if there is no or a weak signal from the audio source for 4 minutes.
The transmitter will work again automatically when the signal improves..
Trouble Shooting
Please ensure you have set your system up using the guidelines in this manual.
5