4
2.1.1
Reaming Attachments
All reaming attachments are geared down to
provide higher torque levels for acetabulum and
femoral reaming, hip screws, or any procedure
where high torque is necessary. All
PowerPro
reaming attachments are easily recognized by
the red-colored proximal ring.
NOTE: Reaming and sawing attachments
should only be used in the “Drill” mode and
are not indicated to be used in the screw or
oscillating drill modes.
All reaming attachments have the following
specifications in the “Drill” mode:
Variable Speed:
0-420 rpm
Torque (forward and reverse):
100 in. lbs.
1.
To attach accessories to Reamer attach-
ments:
(a) Place the handpiece in the safe posi-
tion.
(b) Pull the collet sleeve back and insert
the accessory shank into the collet.
Release the collet sleeve.
2.1.1.1
AO Reamer (PRO2040)
Specifications:
Collet:
Accepts large hex AO reamers
Cannulation: 5.1 mm
Color Ring:
Teal/Red
2.1.1.2
Aesculap Reamer (PRO2060)
Specifications:
Collet:
Accepts Aesculap Reamers
Cannulation: 5.1 mm
Color Ring:
Brown/Red
2.1.1.3
Zimmer/Hudson Reamer
(PRO2047)
Specifications:
Collet:
Accepts Zimmer, Hall Series 3,
Hall Series 4, and Hudson
accessories
Cannulation: 5.1 mm
Color Ring:
Blue/Red
Summary of Contents for Linvatec Hall PowerPro Series
Page 1: ...The Hall PowerPro Attachment Instruction Manual...
Page 25: ...21...
Page 26: ...22...
Page 27: ......
