8.5.2 Graphics Configuration Submenu
Feature
Options
Description
Graphic Interface
Configuration
No option
Internal Adapter
Mode
Disabled
Primary Controller
Secondary Controller
Mode for internal graphics controller when an external video
device is present.
Graphics Memory
Size
2 -
24
- 254
Select graphics memory size in MBytes for the graphic system.
Use even numbers of MBytes only.
Driver Control
Initialization
Enabled
Disabled
Uses OS driver for all graphics system initialization beyond
internal initialization to secondary controller status.
Boot Display Device
CRT & LFP
CRT only
LFP only
TV only
Select the display device used during bootup.
Local Flat Panel
Type
Autodetect
QVGA 1x18
VGA 1x18
SVGA 1x18
XGA 1x18
Customized EDID™
Select a predefined LFP type or set to AUTO to let the BIOS auto
detect the attached LVDS panel. Auto detection is performed by
reading an EDID™ data set via the panel DDC bus.
Note: Customized EDID™ utilizes an OEM defined EDID™ data
set stored in the BIOS flash device.
Backlight Control
0%, 25%, 50%, 75%,
100%
Set local flat panel backlight control value.
TV Standard
NTSC
PAL
HDTV
Select the TV display standard.
TV Resolution
Low
Medium
High
Select the television resolution.
For NTSC, Low=720x480, Medium=800x600, High=1024x768
For PAL, Low=720x576, Medium=800x600, High=1024x768
For HDTV, Low=720x480, Medium=1280x720, High=1920x1080
8.5.3 Cache Configuration Submenu
Feature
Options
Description
Cache Configuration
No option
Cache Enable
Enabled
Disabled
Enables/Disables the L1 and L2 system cache.
L2 Cache Enable
Enabled
Disabled
Enables/Disables only the L2 system cache.
Cache Mode
Write-Back
Write Through
Select the cache mode write-back or write-through.
Cache Allocate
Enabled
Disabled
Select if a cache line should be allocated before write.
Copyright © 2006 congatec AG
X800m12
60/72
