9.6.2 Hard Disk Security
This feature enables the users to set, reset or disable passwords for each hard drive in
Setup without rebooting. If the user enables password support, a power cycle must
occur for the hard drive to lock using the new password. Both user and master
password can be set independently however the drive will only lock if a user password is
installed.
9.6.2.1 Hard Disk Security User Password
Feature
Options
Description
Primary/Secondary
Master/Slave HDD User
Password
enter password
Set or clear the user password for the hard disk.
Note: This option will be shaded if the hard drive does support the
Security Mode Feature set but user failed to unlock the drive during
BIOS POST.
9.6.2.2 Hard Disk Security Master Password
Feature
Options
Description
Primary/Secondary
Master/Slave HDD
Master Password
enter password
Set or clear the master password for the hard disk.
Note: This option will be shaded if the hard drive does support the
Security Mode Feature set but user failed to unlock the drive during
BIOS POST.
Copyright © 2006 congatec AG
X945m13
96/102
