Copyright
©
2015
congatec
AG
TCEDm11
78/96
Feature
Options
Description
Fan Always On At Minimum
Speed
Disabled
Enabled
If enabled, the fan will always run at least at the selected minimum speed, even if the control temperature is below the
fan control start temperature. This is to ensure a minimum air flow all the time. Only visible if Automatic Fan Speed
Control is enabled.
10.4.4
PCI Submenu
Feature
Options
Description
PCI BUS Driver Version
No option
Shows the PCI Bus Driver Version ID Number
PCI Common Settings
PCI Latency Timer
32
, 128, 160, 192,
224, 248 PCI Bus
Clocks
Select value to be programmed into PCI latency timer register.
Generate EXCD0/1_PERST# Disabled
1ms
5ms
10ms
50ms
100ms
150ms
200ms
250ms
Select whether the COM Express EXCD0_PERST# and EXCD1_PERST# pins should
be driven low during POST or how long it will be, if enabled.
VGA Palette Snoop
Disabled
Enabled
Enable or disable VGA palette registers snooping.
PERR# Generation
Disabled
Enabled
Enable or disable PCI Device to generate PERR#
SERR# Generation
Disabled
Enabled
Enable or disable PCI Device to generate SERR#
Reserve Legacy Interrupt 1
None, IRQ3,
IRQ4, IRQ5, IRQ6,
IRQ10, IRQ11
The interrupt reserved here will not be assigned to any PCI or PCI Express device
and thus maybe available for some legacy bus device.
Reserve Legacy Interrupt 2
Same as Reserve
Legacy Interrupt 1
Same as Reserve Legacy Interrupt 1
►
PIRQ Routing & IRQ
Reservation
submenu
Manual PIRQ routing and interrupt reservation for legacy devices.
