Copyright
©
2019
congatec
AG
JCWLm10
44/55
5.9
GPIO Header
The conga-JC370 provides eight GPIOs on connector X5, via the congatec Board Controller. The 3.3 V is provided through a 500 mA resetable
fuse.
Table 31 X5 Pinout Description
Pin Signal
Description
1
GPIO_0
General Purpose Input Output 0
2
GPIO_1
General Purpose Input Output 1
3
GPIO_2
General Purpose Input Output 2
4
GPIO_3
General Purpose Input Output 3
5
GND
Ground
6
GPIO_4
General Purpose Input Output 4
7
GPIO_5
General Purpose Input Output 5
8
GPIO_6
General Purpose Input Output 6
9
GPIO_7
General Purpose Input Output 7
10
+ 3.3 V
3.3 V supply (standby)
Connector Type
X5: 10-pin, 1.25 mm pitch picoblade header (Molex 0533981071)
Possible Mating Connector: Molex 0510211000
5.10
System Management Header
The conga-JC370 provides header X6 for system management. The header can alternatively support eight GPIOs (GPIO_8 to GPIO_15) via
assembly option.
Table 32 X6 Pinout Description
Pin Signal
Description
1
PWROK/GPIO_8
Power good/General Purpose Input Output 8
2
PM_BATLOW#/GPIO_9
Battery low signal/General Purpose Input Output 9
3
GBE2_SDP0/GPIO_10
Gigabit Ethernet Software-Definable Pin/General Purpose Input Output 10
4
WDG_TRIG#/GPIO_11
Watchdog trigger/General Purpose Input Output 11
5
GND
Ground
6
PM_SLP_S3#/GPIO_12
Suspend to RAM state (active low output)/General Purpose Input Output 12
7
PM_SLP_S4#/GPIO_13
Suspend to Disk state (active low output)/General Purpose Input Output 13
X5
X6
