![Congatec conga-JC370 User Manual Download Page 13](http://html1.mh-extra.com/html/congatec/conga-jc370/conga-jc370_user-manual_2652485013.webp)
Copyright
©
2019
congatec
AG
JCWLm10
13/55
2
Specification
2.1
Feature List
Table 6
Feature Summary
Form Factor
Based on 3.5” form factor (146 x 102 mm)
Processor
8
th
Generation Intel
®
Core™ i7,i5, i3 and Celeron Single Chip Ultra Low TDP Processors
Memory
Two memory sockets (located on the top side of the conga-JC370). Supports
-
SO-DIMM non-ECC DDR4 modules
-
Data rates up to 2400 MT/s
-
Maximum 64 GB capacity (32 GB each)
congatec Board
Controller
Multi-stage watchdog, non-volatile user data storage, manufacturing and board information, board statistics, hardware monitoring, fan control, I2C
bus, Power loss control
Chipset
Intel
®
300 Series PCH-LP integrated in the Multi-Chip Package
Audio
Realtek ALC888S-VD High Definition Audio
Ethernet
2x Gigabit Ethernet via
:
-
Intel
®
l219-LM for i7 and i5 variants (supports vPro/AMT) or l219-V for i3 and Celeron variants
-
Intel
®
I225-LM (with support for TSN) or Intel I255-V (without TSN)
Graphic Interfaces
1x DP++
1x LVDS/eDP
1x USB Type-C (DP)
Back Panel I/O
Connectors
1x Disp+
1x USB Type C (alternate mode)
2x USB 3.1 Gen 2
2x Gigabit Ethernet
1x COM port (COM1)
Onboard I/O
Connectors
Extension Sockets:
-
1x M.2 key B, type 3042/2242 (PCIe x2/USB/SIM)
-
1x M.2 key E, type 2230 (PCIe x1/USB/CNVi)
-
1x M.2 key M, type 2280 (PCIe x4/SATA/Intel
®
Optane
™
)
-
1x Mini Card full-size or half-size (PCIe x1/SATA/USB)
SATA Connectors:
-
1x Standard SATA 3.0/eSATA/SATADOM
-
1x SATA power header (5 V)
Audio
-
1x
Front panel header (HP-Out, MIC)
-
1x Internal audio header (Line-Out, DMIC)
1x LVDS connector (top-side)
1x Backlight power connector
1x Micro-SIM card slot
1x COM port (COM2)
1x Mini-FIT power connector
1x Dual USB 2.0 header
1x Intrusion detection header (case open)
2x COM ports (COM3 and COM4)
1x CPU fan header (12 V only)
1x Front panel header (power button, reset,sleep, LEDs)
1x GPIO header (GPIO 0–7)
1x SMB/I2C connector
Optional Onboard
Interfaces
1x CAN header
1x HDMI (DP is not supported with this option)
1x GPIO header (GPIO 8-15 with System Management overlay)
1x iDP header
(this option does not support DP on USB Type-C)
1x eDP (with LVDS overlay)