Copyright © 2014 congatec AG
IGX1m02 76/134
17.4.1
LVDS Support
Determines whether the LVDS interface is available.
Disabled
The LVDS interface is not available.
Enabled
The LVDS interface is available.
17.4.2
LVDS Panel Config Select
Determines the resolution of the LVDS (Low Voltage Differential Signalling) interface. The selected resolution should be the same as that of
the connected LCD panel
.
By using the “LVDS” OEM tool, an additional
LVDS adjusted parameters
entry can be
created, which enables the use of freely configurable
LVDS parameters.
17.4.3
Non-EDID Support
For LCD panels that do not support a DDC (Display Data Channel), no EDID
(Extended Display Identification Data) is available.
For LCD panels without EDID support,
Enabled
must be set. To install a Linux operating system, it may be necessary to initially select “Non-
EDID Support = Disabled”, despite having a connected LVDS panel without DDC support. After the Linux and driver installation is completed,
“Non-EDID Support = Enabled” can be set again.
Disabled
The LCD provides EDID.
Enabled
The LCD does not provide EDID.
17.4.4
LVDS Mode
The selected mode of the LVDS interface must be supported by the LCD panel used.
