Congatec conga-IGX User Manual Download

Page: 110 / 134

IGX1m02 110/134

21.1.12

CSM Configuration

Opens the submenu for configuring the Compatibility Support Module (CSM).

This submenu is only available if

Secure Boot Control

is disabled under

Setup

–>

Secure Boot Configuration

Launch CSM

Specifies whether the Compatibility Support Module (CSM) is executed. A legacy operating

system can only be booted if the CSM has been

loaded.

Enabled

The CSM is executed so that a legacy or UEFI operating system can be booted.

Disabled

The CSM is not executed so that a only a UEFI operating system can be booted.

Boot Option Filter

Specifies the drives from which booting can be carried out.

UEFI and Legacy

Booting is possible both from drives with UEFI OS and from drives with Legacy

OS.

Legacy only

Booting is only possible from drives with Legacy OS.

UEFI only

Booting is only possible from drives with UEFI OS.

Launch PXE OpROM Policy

Specifies which PXE option ROM is booted. For the PXE boot, both the normal

(Legacy) PXE boot and a UEFI PXE boot are available.

Do not launch

No option ROMs are booted.

UEFI only

Only UEFI option ROMs are booted.

Legacy only

Only Legacy option ROMs are booted.

Summary of Contents for conga-IGX


































































































































Search results

Summary of Contents for conga-IGX

Reviews:

Related manuals for conga-IGX

Brands by name

Popular brands

Congatec conga-IGX, User Manual

Search results

Summary of Contents for conga-IGX

Reviews:

Related manuals for conga-IGX

Brands by name

Popular brands