Congatec 046901 User Manual Download Page 60

Page: 60 / 108

2013

congatec

TU87m10

60/108

Signal

Pin # Description

I/O

PU/PD Comment

DDI2_DDC_AUX_SEL

C34

Selects the function of DDI2_CTRL and DDI2_CTRLDATA_AUX-.

This pin shall have a IM pull-down to logic ground on the module. If this input

is floating, the AUX pair is used for the DP AUX+/- signals. If pulled-high, the

AUX pair contains the CTRLCLK and CTRLDATA signals

I 3.3V

DDI

DDI3_PAIR0-

C39

C40

Multiplexed with DP and TMDS.

Multiplexed with DP3_LANE0- and TMDS3_DATA2-.

O PCIE

Not supported

DDI

DDI3_PAIR1-

C42

C43

Multiplexed with DP and TMDS.

Multiplexed with DP3_LANE1- and TMDS3_DATA1-.

O PCIE

Not supported

DDI

DDI3_PAIR2-

C46

C47

Multiplexed with DP and TMDS.

Multiplexed with DP3_LANE2- and TMDS3_DATA0-.

O PCIE

Not supported

DDI

DDI3_PAIR3-

C49

C50

Multiplexed with DP and TM.

Multiplexed with DP3_LANE3- and TMDS3_CLK-.

O PCIE

Not supported

DDI3_HPD

C44

Multiplexed with DP3_HPD and HDMI3_HPD.

I 3.3V

Not supported

DDI3_CTRL C36

Multiplexed with and HDMI3_CTRLCLK.

DP AUX+ function if DDI3_DDC_AUX_SEL is no connect.

HDMI/DVI I2C CTRLCLK if DDI3_DDC_AUX_SEL is pulled high

I/O PCIE

I/O OD 3.3V

Not supported

DDI3_CTRLDATA_AUX- C37

Multiplexed with DP3_AUX- and HDMI3_CTRLDATA.

DP AUX- function if DDI3_DDC_AUX_SEL is no connect.

HDMI/DVI I2C CTRLDATA if DDI3_DDC_AUX_SEL is pulled high.

I/O PCIE

I/O OD 3.3V

Not supported

DDI3_DDC_AUX_SEL

C38

Selects the function of DDI3_CTRL and DDI3_CTRLDATA_AUX-.

This pin shall have a IM pull-down to logic ground on the module. If this input

is floating, the AUX pair is used for the DP AUX+/- signals. If pulled-high, the

AUX pair contains the CTRLCLK and CTRLDATA signals

I 3.3V

Not supported

Note

Some signals have special functionality during the reset process. They may bootstrap some basic important functions of the module. For more

information refer to section 8.5 of this user’s guide.

The Digital Display Interface (DDI) signals are multiplexed with HDMI and DisplayPort (DP). The signals for these interfaces are routed to the

DDI interface of the COM Express connector. Refer to the HDMI and DisplayPort signal description tables in this section for information about

the signals routed to the DDI interface of the COM Express connector.

Summary of Contents for 046901













































































































Search results

Summary of Contents for 046901

Reviews:

Related manuals for 046901

Brands by name

Popular brands

Congatec 046901, User Manual

Search results

Summary of Contents for 046901

Reviews:

Related manuals for 046901

Brands by name

Popular brands