Copyright
©
2013
congatec
AG
TU87m10
101/108
10.6
Boot Setup
Select the Boot tab from the setup menu to enter the Boot setup screen.
10.6.1
Boot Settings Configuration
Feature
Options
Description
Quiet Boot
Disabled
Enabled
Disabled
displays normal POST diagnostic messages.
Enabled
displays OEM logo instead of POST messages.
Note: The default OEM logo is a dark screen.
Setup Prompt Timeout
1
0 - 65535
Number of seconds to wait for setup activation key.
0 means no wait for fastest boot (not recommended), 65535 means infinite wait.
Bootup NumLock State
On
Off
Select the keyboard numlock state.
System Off Mode
G3/Mech Off
S5/Soft Off
Define system state after shutdown when a battery system is present.
Power Loss Control
Remain Off
Turn On
Last State
Specifies the mode of operation if an AC power loss occurs.
Remain Off
keeps the power off until the power button is pressed.
Turn On
restores power to the computer.
Last State
restores the previous power state before power loss occurred.
Note: Only works with an ATX type power supply.
AT Shutdown Mode
System Reboot
Hot S5
Determines the behavior of an AT-powered system after a shutdown.
Enter Setup If No Boot
Device
No
Yes
Select whether the setup menu should be started if no boot device is connected.
Enable Popup Boot
Menu
No
Yes
Select whether the popup boot menu can be started.
Boot Priority Selection
Device Based
Type Based
Select between device and type based boot priority lists. The “Device Based” boot priority list allows you to select from
a list of currently detected devices only. The “Type Based” boot priority list allows you to select device types, even if a
respective device is not yet present. Moreover, the “Device Based” boot priority list might change dynamically in cases
when devices are physically removed or added to the system. The “Type Based” boot menu is static and can only be
changed by the user.
