EN
2
This table generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to other devices in the vicinity. However,
there is no guarantee that interference will not occur in
a particular installation. Harmful interference to other
devices can be determined by turning this table on
and off. Try to correct the interference using one or
more of the following: reorient or relocate the receiving
device, increase separation between the equipment,
connect the table to an outlet on a different circuit from
that which the other device(s) are connected, and
consult Coinfycare or your local dealer for help.
Unplug the table from the power supply before starting
cleaning or any type of maintenance operations.
The table should be kept out of the reach of children
when there is no adult supervision.
The table is designed for discontinuous interval
operation, so the continuous running time of the motor
should never exceed 2 minutes. Should this happen,
damage may occur due to overheating of the
electronics.
Always use original accessories and spare parts
provided by your local
dealer.
Always cover the table with a towel, disposable paper
or a cover and change it for each user, thus ensuring
correct hygiene and extending the useful life of the
upholstery.
Only connect the table to a properly installed and
grounded outlet. The local mains voltage must
correspond to the technical data of the device.
The power outlet should be accessible in case
the table needs to be quickly unplugged at any
given time. Always pull the plug and not the mains
cable.
TECHNICAL SPECIFICATIONS
Product dimensions
EL08 - Base Chiropractic Table
Length: 1800-1930mm
Width: 550mm
Lifting stroke distance: 220mm
Lifting range of bed surface: 450-770mm
EL08B - Chiropractic Breakaway Table
Length: 1800-1930mm
Width: 550mm
Lifting stroke distance: 220mm
Lifting range of bed surface: 450-770mm
EL08F - Premium Chiropractic Table
Length: 1800-1950mm
Width: 660mm
Lifting range of bed surface: 600-800mm
Included angle between head plate and horizontal
plane: -
20°≤A≤25°
Included angle between leg plate and chest plate:
0°≤B≤25°
EL08FS - Stationary Chiropractic Table
Length: 1730-1890mm
Width: 530mm
Fixed table height: 550mm
Included angle between head plate and horizontal
plane: -
20°≤A≤15°
Included angle between leg plate and chest plate:
0°≤B≤30°
If the electrical supply cable is defective,
disconnect the table immediately and inform your
dealer or a specialized technician.
Position the power cord properly so that it cannot be
tripped over.
Unplug the power cord from the mains if the table is
not going to be used for a long period of time.
If you detect any abnormality in the operation of the
table, consult your dealer or a specialized technician.
Never manipulate any electrical part or open or
repair any part of the table.
Only your dealer or a specialized technician should
repair the table.
Never touch the table or the power cord with wet
hands.
Never place your hands or any other part of your
body in any hole or void on the table while it is in
operation.
Make sure there are no objects in the space under
the table that could cause collisions or entrapment
during operation.
Make sure that your feet are not resting on the
peripheral foot bar or foot control during treatment
and especially when sitting near the table. This
could create a dangerous situation where your leg
is caught between the section and the peripheral
foot bar or floor surface.
Take into account the weight distribution on the
table when working. The weight must be distributed
along the table without concentrating on its ends to
maintain the correct stability.
You should not sit on the head and foot sections. If
you do there is a danger of tipping and table damage.
PLACEMENT IN THE
WORKPLACE
The table has two wheels to facilitate movement
to the place where it will be used.
Once correctly positioned, the table has two
adjustable feet that prevents it from moving during
use.
