control lever
EN
Adjusting head plate width
As shown in Figure 7, pull the control lever
to adjust the width of the head plates.
Adjustment of front bed angle
Lift up the pull rod to release the angle
adjustment.(Figure 11)
Figure 7
Drop Operation
Lift the pull rod with one hand, and then press
down the bed section to achieve the effect of
drop pressure. As shown in Figure 8.
Pull rod
Figure 11
Adjustment of bed middle section angle
Lift up the pull rod to release the angle
adjustment.(Figure 12)
Figure 8
Drop tension adjustment
Use the black knob on the side as indicated
below. Tension direction is indicated on the
knob.(Figure 9)
Figure 12
Head horizontal angle adjustment
As shown in Figure 13, the horizontal angle of the
head plate can be adjusted. The black knob can
be adjusted to fix the angle of the head. The
angle range is - 10° to 10°.
Figure 9
Adjustment of bed tail section angle
Lift up the pull rod to release the angle adjustment.
(Figure 10)
Figure 13
Pull rod
Figure 10
Pull rod
