Conexant AccessRunner CX82310, User Manual

Page: 42 / 115

• •
LAN IP Address & Subnet Mask: The default is 10.0.0.2 and 255.0.0.0. User can change it to other private IP address,
such as 192.168.1.2, and 255.255.255.0.
DHCP Server
• •
System Allocated: The DHCP address pool is based on LAN port IP address plus 12 IP addresses. For example, the
LAN IP address is 10.0.0.2; the DHCP address pool is at the range of 10.0.0.3 to 10.0.0.14.
• •
User Defined: The DHCP address pool is at the range of User Defined Start Address and User Defined End Address .
The maximum pool size can be 253 IP addresses: 255 total IP addresses V 1 broadcast address V 1 LAN port IP address.
•
DHCP Gateway Selection: The default setting for the DHCP Gateway Selection is Automatic¨. The user can select the User
Defined¨ to specify ¡§User Defined Gateway Address¡¨. The DHCP server will issue the User Defined Gateway Address¡¨ to
the LAN DHCP clients.
• •
Lease time: The Lease time is the amount of time of a network user will be allowed to connect with DHCP server. If all
fields are 0, the allocated IP addresses will be effective forever.
• •
User mode: Under the Single User mode, the DHCP server only allocates one IP address to local PC. Under the
Multiple User mode, the DHCP server allocates the IP addresses specified bye the DHCP address pool.
Ethernet Mode Setting
• •
The Ethernet Mode configuration page allows the user to set the LAN port into Auto Sense, 100 Mbps Full Duplex, 100
Mbps Half Duplex, 10 Mbps Full Duplex or 10 Mbps Half Duplex.