50
3
GENERAL
3.1
INTENDED PURPOSE
This water softener is used to protect the water pipes and hot water heater against lime scale. Partially sof-
tened water protects appliances and fittings and reduces consumption of detergents and cleaning agents.
Please refer to the chapter 4.1 “INTENDED USE” for use restrictions.
3.2
SCOPE OF SUPPLY
/
Water softener
/
Built-in rotary flange JQE 1¼" with bayonet fixture and screw connection 1"
/
Built-in rotary flange JQE 1" with bayonet fixture
/
Bypass valve JQU with screw connection 1"
/
2 armoured hoses, L = 1000 mm
/
Safety overflow hose and wastewater hose
/
Trap with top piece
/
Operating instructions
/
Hardness measuring equipment JGHP 0 - 30 °dH (order no. 8742120)
Please check the consignment immediately after unpacking for completeness and transport damage, as
later complaints can not be accepted.
This water softener is suitable for use in cold drinking water (water of the munic-
ipal water supply) up to a maximum water temperature of 30 °C (86 °F). It is abso-
lutely essential that the manufacturer/supplier will be consulted prior to any op-
eration of the device using water of a different quality, respectively with water
that contains additives.
Lime scale deposits inhibit water flow and can therefore result in increased ener-
gy consumption.
Summary of Contents for CLEAR SOFT
