CONDTROL IR-CAM4, User Manual

Page: 16 / 20

16
camera, it will display <XXX° or >XXX° with XXX being the min or max
temperature of the selected range.

To modify the measurements attributes, select the measurement
parameter, and then press the
Confirm key. The screen will display the
settings dialog box. The below figures are spot and area measurement
respectively.
Area settings can modify the emissivity, area measurement type and area
move parameter. Measurement types are Min Temp, Max Temp or Average Temp.
Area Move parameter choices are Position or Size. The selected parameter will be
adjusted by the directional arrow keys.
7.3. Freeze and save image
Press S key to freeze the image and select “ C ” to exit the operation.
There are three ways to save the image:

Press S key to freeze the image and then select ” Save ” to save the image,
or select “ Cancel ” to exit the operation.

Press Menu key to activate the main menu. Choose File->Save and the
system will initiate the save cycle.

With the “Trigger” parameter, located in Setup->Sys. Setup->Trigger, set
to “Save Key”, pulling and releasing the trigger key will initiate the save
cycle.
7.4. Viewing stored Images

Press Menu key to activate the main menu. Choose File->Open to open
the image.

When image is opened, choose Left or Right keys to select the previous
or next images respectively.

It will display all IR images of each saved image, it will display “ No
Image ” if there is no IR image for that saved image.

Press C key to exit the Image view mode and return to the real-time
measurement mode.
7.5. Export saved images

Use of USB port to download images in TF card. With a standard USB
cable, connect device port to PC and export saved images.

Remove the TF card and insert into TF card reader, connect to USB port
on PC and export saved images.