6. With (2) people, lean T-ramp back until the axle / wheel
assemblies touch the ground (a). Using a ¾” wrench or socket,
remove the (2) bolts securing the Mechanism to the skid (b). The
T-ramp is now free from the shipping skid.
7. Lean T-Ramp back slowly until the Kickstand Wheel is
touching the ground. The T-Ramp should now be safely
supported to roll it into position to connect to truck hitch. Use
wireless remote or onboard switch to lower the Mechanism to
line up with truck hitch. Follow the instructions in Section 5.2 to
secure the T-Ramp to your truck for transport.
8. The T-Ramp height setting arrives from the factory set at
Setting 1, with the Stop Ring un-set. See above diagram and
Section 5.3.2 in the Operation Manual to properly set the Stop
Ring before use. Also See Section 5.3.2 to customize the T-Ramp
height setting for various vehicles.
CAUTION:
Refer to the included Operations Manual prior to operating this product. Always make sure that all fasteners are tight and all pins are in place prior to use. Understand
the limitations of this product and do not exceed these limitations. Technical Components Development & Design is not responsible for any damage incurred by
exceeding this product’s limitations in structure and/or functionality. All illustrations and specifications contained in this guide and the Operations Manual are based on
the latest product information available at the time of printing. Technical Components Development & Design, Inc. reserves the right to make changes at any time,
without notice, in color, materials, equipment, options, specifications and models. Models may be shown with optional equipment. If instructions are not clear, please
refer to the Operations Manual included with the T-Ramp
TM.
. Additional information is available at
www.condor-lift.com
or call 1-800-461-1344.
Return Policy:
The Condor® T-Ramp
TM
is non-returnable. (See warranty information for more details)
Notice:
Inspect your product upon delivery. Any consideration for return does NOT include any damages which may have occurred during shipment of the product. In fact, the
moment the product leaves the premises of the manufacturer it immediately becomes the sole property of the purchaser. It is most important that upon delivery, the
recipient thoroughly inspect the product to satisfy that it is being received in perfect condition, and without damage. If damage is found, it will be the complete
responsibility of the recipient to identify (and to make known), this damage prior to signing the acceptance page for the delivering freight company. The manufacturer
accepts NO responsibility for damaged freight. Claims must be dealt directly by the recipient, and with the freight carrier who is delivering the product.
Thank you for purchasing the Condor® T-Ramp
TM
.
Condor®
is a registered trademark of
Technical Components Development & Design, Inc.
The Condor® T-Ramp
TM
is US Patented & International Patent Pending.
Patent Numbers: 8,123,455; 9,010,795; 13/406,425; 61/984,362
Technical Components Development & Design, Inc.
Condor® Products
210 W. Stephenie Drive
Cortland, IL 60112
Phone: (815) 754-7418
Fax: (815) 754-7419
Web Site: www.condor-lift.com
