9
Note:
the selected bait boat here is just for your reference, the installation way
may vary according to the structure of different bait boats.
Tool List (not included)
1) Hand drill
2) 5/32” drill bits
3) Phillips and flat-head screwdriver
4) Marine sealant
Introduction of the RES sensor
RES sensor indicates the whole set of electric & sonar control system. It is used to
be mounted on your bait boat.
1) A wireless remote sonar
sensor
2) A controlling box
3) An antenna-extended-cable
4) Two antennas for mounting
on bait boat & sonar display
5) Two cable clip
6) A battery holder
7) A metal bracket to fix the
sensor
8) A power cable
9) Two screws
Note:
the antenna-extended cable is used to connect the antenna and the
control box. As sometimes you may have to mount the antenna on your bait
boat, instead of connect it directly to the control box. Thus it will be convenient for
you to find enough space to place the control box at a proper position.
