27
4) Press
Ent
to enter into setting.
5) Use the
Up/Down Arrow
to change the value.
6) Press
Ent
to confirm and exit the setting.
Note:
after you enter into the setting by press
Ent key
, the operation figure will
change from A to B, then just press
Down Arrow key
to change the levels.
Zoom Range
Zoom Range is used to enlarge some certain depth segment, which is helpful for
you to see small details, fish signals and bottom structure.
Your Fish finder has a wonderful performance to see any depth segment with any
scale.
For example, if the current Depth Range is 0~40m, by setting Zoom Range to
20~25m, you can see the sonar image of the 20~25m depth segment with a 8x
scale. And by setting it to 20~30m, you can see the sonar image of the 20~30m
depth segment with a 4x scale.
To set the
Zoom Range
:
1) Press
Menu
to enter into menu setting.
2) Repeatedly press
Menu
to switch to
DISPLAY
menu.
3) Use the
Up/Down Arrow
to select
Zoom
Range
Option.
4) Press
Ent
to enter into setting.
5) Use the
Up/Down
Arrow to select the option.
6) Press
Ent
to confirm the setting.
7) Press
Exit
to exit the setting
Note
: after select “
on
” option:
1) Press
Ent
to switch to the “
Up
” or “
Low
” Range.
2) Press
Up/Down Arrow
to change the value.
3) Press
Ent
to confirm the setting.
4) Press
Exit
to exit the setting.
