16
Note:
correctly connect the control box to the bait boat battery, and then you can
monitor the remained voltage of your bait boat all the time. Avoiding using under a
low battery.
Note
: the range of battery monitoring is 5.2~15v.
Warning
: be careful not reversing connection of positive & negative pole to the
bait boat battery. (Black wire is for negative pole; black & white wire is for positive
pole).
10. Assemble the bait boat.
With the above steps were finished, carefully assemble your bait boat, then the
complete set of bait boat & wireless fish finder is ready to use.
Note:
sometimes you may need a switch to control on/off of the RES sensor (see
the “packing list”).
1) Drill a hole on your bait boat housing; tighten the switch on the bait boat.
2) Connect the switch to the power cable.
3) Spread some sealed glue to the drilled location, preventing water leakage from
happening.
