13
4. Mount the wireless sensor on the supporting plate, as instructed below
a) Drill three holes on the supporting
plate.
- Diameter of hole-1 is about 12.5mm
- Diameter of hole-2 and hole-3 is
about 3.5mm
b) Tighten the senser by screws
Note:
use a pencil to mark the
position before drilling the hole-2 and
hole-3.
5. Mount supporting plate on the top cover of bait boat.
Drill 4 holes on the supporting plate, and tighten the supporting plate on the top
cover of your bait boat by screws.
