25 | Installation and Planning
2588705_A_EN_1811_UB_IOM
UB
1. Mount the Ultrasonic Blower Pack. Refer to
"Location Requirements" on page 20
and
"Clear-
ance Requirements" on page 20
.
a. Locate a 2×4 wooden stud or equivalent support in the mounting surface, and mark the
position with the help of a level – refer to
Figure 8 - on the facing page
.
b. Install the wall bracket to the wall with mounting screws strong enough to support the
weight of the Ultrasonic Blower Pack. Refer to
"Technical Data" on page 16
.
c. Rotate the interlocks on the side of the unit outwards to unlock them.
d. Lower the Ultrasonic Blower Pack onto the wall bracket.
e. Twist the adjustable legs to adjust their lengths and ensure that the Ultrasonic Blower Pack
is level.
f. Return the interlocks to their locked position.
