Introduction and Overview
1.1
General
This manual is a guide and reference handbook for engineers and system integrators who wish
to use the Concurrent Technologies’ PP 110/01x ultra high-performance Pentium III-M single
board computer. The board has been designed for high-speed multiprocessing applications
using a PC-AT
™
architecture operating in a CompactPCI Bus environment.
The PP 110/01x board is available in several different variants which differ by the processor
speed, the amount of fitted SDRAM, the CompactPCI signaling voltage and the rear Ethernet
connector configuration. Currently the board is available with either an 800MHz or 1.2GHz
Pentium III-M processor designated by PP 110/010 and PP 110/012 respectively. The other
configuration options are specified by a two-digit suffix to the board name; refer to the product
data sheet for further details. Further details of other board options are given in Section 1.3.
References to the board in this document will use the name PP 110/01x unless they apply only
to a specific variant, in which case the full name will be used.
The information contained in this manual has been written to provide users with all the
information necessary to configure, install and use the PP 110/01x as part of a system. It
assumes that the user is familiar with the CompactPCI bus and PC-AT bus architectures and
features.
PP 110/01x
1-1
1 x Ethernet
10/100Mbps
2 x Ethernet (PSB)
10/100/1000Mbps
PMC
Rear I/O
64-bit
PCI
B
us
32-bit
PCI Bus
EIDE
1 x RS232
PMC
Module
PMC
Module
PMC
Interface
PMC
Interface
CompactPCI
Graphics
Interface
Mouse
Interface
Keyboard
Interface
Serial
Interface
USB
Low Pin
Count
Interface
EIDE
Interface
or
CF
TM
3V
IPMB 1 x USB
69030
Bridge
Printer
2 x
RS232
Transition Module
Real-Time
Clock
IPMI
Battery
Backed
SRAM
Application
Flash
EPROM
BIOS
Flash
EPROM
S-DRAM
Low Power
Pentium III
Intel
82546
ServerWorks
ServerSet III LE
™
PCI
Bridge
Figure 1-1 Overview
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
