ENGLISH
6
3. Installation & usage
3.1
Installation
The combo USB hub & card reader can work without a power supply, but it is
strongly recommended to use the power supply. When you are not using the
power supply only low power USB devices are supported. (Like flash drives,
keyboards, etc).
Turn on your computer.
Connect the included power supply to the DC input connector of the combo
USB hub & card reader and to a free wall outlet.
Connect the included mini-USB to USB cable to the mini-USB port of the
combo USB hub & card reader and to a free USB port on your computer.
The combo USB hub & card reader will be recognized and installed
automatically. No driver installation is required. Each card slot will get a unique
drive letter on your computer.
3.2
Usage
When the combo USB hub & card reader is connected and installed, you can
insert a memory card into a card slot, or connect a USB device to one of the
free USB ports.
When you insert a memory card in a card slot on the combo USB hub & card
reader, the memory card will be recognized automatically.
When you connect a USB device to one of the free USB ports on the combo USB
hub & card reader, the connected device will be recognized automatically.
Depending on your USB device you might need to install a driver for the USB
device.
Enjoy the use of your
Conceptronic combo USB hub & card reader !
