ENGLISH
Note:
1.
If the Conceptronic Earbridge headset is not in pairing mode, your mobile phone won't
find the Headset. Please set the headset on pairing mode
before letting your mobile phone search for the Headset.
2.
If no pairing is possible for a period of time (approx. two minutes), the headset will
automatically power off, and so the previous pairing (if any) is revoked. You may need to
repeat steps 1 to 3 until pairing succeeds
Making Calls
You are able to use the Headset to make calls when it is paired successfully with your mobile
phone.
1.
Using voice dialing
– Press S1 button, waiting for a beep and say the name of the
person you want to call. Press S1 button again to cancel voice dialing.
2.
Using phone keys
– Dial the number on the mobile phone as you usually do. Once the
call has been set up, the voice will be transmitted to Headset automatically.
3.
Redial
– Press and hold S2 button for 3 seconds to redial the last number you called.
Answering/Ending Calls
1.
When the headset is powered on and the mobile phone rings, you will hear a musical
tone and the blue indicator will change to be quick flashing. Press S1 button to answer
the call.
2.
Press and hold S2 button for 3 seconds to reject the call.
3.
If the Headset is powered off, press and hold S1 button for 3 seconds to turn it on and
answer the call.
4.
Adjust Headset volume by pressing S1 button for volume up and pressing S2 button for
volume down.
5.
End calls by pressing and holding S2 button for 3 seconds or do nothing.
Note:
Due to the different design of some mobile phones, an auto-disconnect may happen even
when the Conceptronic Earbridge Headset is powered on. In that case, the Headset won't ring
when there is an incoming call. Press S1 button for 1 sec. to reconnect the Headset with
mobile phone for an incoming call.
Transfer/Switch Calls
1.
Press and hold S1 button for 3 seconds to transfer the call to mobile phone while talking
on the Headset. If you want to transfer the call back to Headset, press S1 button again.
2.
Press and hold S2 button for 3 seconds to switch to second call if a second call is
coming into while talking on a call. This function only works under your mobile phone
service provider provides such service.
Mute
Press both S1 and S2 buttons in the same time for a Mute function. Press both S1 and S2
buttons in the same time again to disable the Mute function.
