Concept2 SVE6550ss, User Manual

Page: 96 / 100

96
EN
SVE6550ss / SVE6550wh
Attention!
If the mains lead is damaged, it should be replaced by the manufacturer, its service agent or a similarly qualified
person in order to avoid a hazard.
Electrical connection
y Verify that the connected voltage and current protection correspond to the data on the nameplate.
y
Only use electrical sockets with earthing.
y
Do not use splitter sockets, connectors or extension cords.
y The plug of the power cord must be freely accessible even after its installation.
y
Changes to the connection my only be made by a qualified professional.
y
The electrical safety of the appliance can only be guaranteed if the protective terminal of the appliance is
connected to the protective conductor of the power distribution network.
y
The manufacturer is not responsible for damage to persons or objects due to missing or incorrect
protective connection.
y
The power cord must be positioned so that it does not come into contact with the hot parts of the
appliance and is not deformed or excessively bent.
y
If the appliance is connected to a terminal block or to a distribution box, observe the colour coding or
description of individual conductors.
SERVICING
Replacing a bulb
To illuminate the interior of the appliance, a halogen bulb of high thermal
resistance is used (25–40 W/220–240 V, T300 °C).
To remove the bulb proceed as follows:
1. Disconnect the appliance from the power supply, or switch off the appropriate
circuit breaker.
2. Unscrew the glass cover in the anti-clockwise direction according to Fig. 12
and replace the bulb with a bulb of the same type and parameters.
3. When installing a new bulb, use a rag or paper wipe to hold the bulb.
4. Re-install the glass cover.
Fig.12