4
1.3 INTRODUCTION
This manual covers the Sentinel S55.
Before commencing installation of the Smoke Screen ensure that you have all the following equipment supplied
in the box:
•
1 x Smoke Screen.
•
1 x Mounting bracket.
•
1 x
Swift-Fit fluid reservoir (boxed)
.
•
2 x 12v batteries.
•
1 x Literature pack and warning sign.
•
1 x Extra 30-degree Nozzle for wall mounted installation.
You will also need:
•
Mains power supply: an unswitched 13 amp fused spur connected to a dedicated breaker.
•
Connections into the alarm panel or other triggering system.
•
PIR (or equivalent) to provide the hold-off where required.
1.4 OVERVIEW
The Smoke Screen is designed to form part of an existing intruder alarm system but may also be configured as a
‘stand-alone’ system or as part of a centrally monitored, command and control system. A typical installation is
shown in the following schematic:
