Concept2 SENTINEL S55 v6, Installation And Operation Manual

Page: 20 / 31

19
Parameter settings
MENU ITEM DELIVERY
SETTING AVAILABLE SETTINGS REMARKS
Event Log - Read-only. See Section 7.2 for a list of the major events
Setting Smoke Time 5 seconds 5 to 360 seconds in 1
second intervals. See Section 3.1.
Setting Panic Smoke Time 0 seconds 5 to 360 seconds in 1
second intervals. See Section 3.1.
Invert Trigger Mode Set, Alarm &
Hold-off
N/C Mode.
Panic
N/O Mode
N/O Mode
N/C Mode Trigger inputs can be individually set to:
N/O Mode = unit detects a normally open
circuit going closed to activate.
N/C Mode = unit detects a normally closed
circuit going open to activate.
See Section 5.5.
Enable/Disable Battery Enable Disable
Enable The PCB-mounted battery switch is “Off” on
delivery.
See Section 5.8.
Enable/Disable ESM Disable Disable
ESM
Extreme Energy Saving Mode.
See Section 5.2.
Smoke Delay 0 seconds 0 to 60 seconds in 1
second intervals. See Section 3.1.
Re-triggering Delay Delay
Instant Available if Smoke Delay set to > 0 seconds.
Select Delay to apply set Smoke Delay time
to every re-trigger by the Hold-off.
Instant = no delay.
See Section 3.1.
Settle Timer 0 seconds 0 to 60 seconds in 1
second intervals. See Section 3.1.
Verify Timer 0 seconds 0 to 3600 seconds in 5
second intervals. See Section 5.3.
EN Mode - Nil. Manufacturer-only setting.
Live Temperature - Read only. Displays the current heater block
temperature.
Manufacturer Setting - Nil. Manufacturer-access only.
Reboot System No No
Yes Available only if “Service Mode” active.
Reboots the Smoke Screen (all settings are
retained).