EN
EN
47
46
SM 8000
SM 8000
CONTROL PANEL
On/Off lever
This lever switches the blender into the operating (
On
position) or off (
Off
position) state. After putting the
blender into the operating state (
On
position), the power LED and the
Smoothie
,
Ice Cream
, and
Soup
button indicators will light up.
Important: To make your blender work, the
On/Off
lever must be in the
On
position.
"Pulse" lever – Pulse function
After pressing the
Pulse
lever downwards, the blender works in the pulse mode.
The pulse function is interrupted by releasing the lever.
Rotary speed controller
This controller has two basic positions:
O
and Continuous Speed Control.
Use this controller to control the speed continuously as needed.
To switch the blender at low speed, turn the controller to the
Min
position.
To switch the blender at high speed, turn the controller continuously as needed up to the
Max
position.
Preset programs
The control panel of the blender contains three buttons with preset automatic functions
Smoothie
,
Ice
Cream
, and
Soup
.
Smoothie button – Preparation of smoothies and cocktails
The blender works automatically in this program; the speed increases and decreases gradually.
The
On/Off
lever must be in the
On
position and the speed controller in the
O
position. After pressing the
Smoothie
button, the blender starts working: first it blends the ingredients three times in pulses and then it
slowly increases and decreases the speed to achieve perfect mixing. After 30 seconds, the blender switches
off automatically.
This program can be cancelled anytime during the operation by pressing the
Smoothie
button.
In case of insufficient mixing, repeat this function as described above.
Ice Cream button – Preparation of ice cream or crushed ice
The blender works automatically in this program; the speed increases gradually up to the maximum.
The
On/Off
lever must be in the
On
position and the speed controller in the
O
position. After pressing the
Ice Cream
button, the blender starts working: first it blends the ingredients three times in pulses and then it
slowly increases the speed up to the maximum. After 30 seconds, the blender switches off automatically.
This program can be cancelled anytime during the operation by pressing the
Ice Cream
button.
To achieve perfect mixing of the ingredients, use the enclosed tamper to keep blending the ingredients
throughout the preparation of ice cream.
In case of insufficient mixing, repeat this function as described above.
Soup button – Preparation of Soups
The blender works automatically in this program; the speed increases and decreases gradually.
The
On/Off
lever must be in the
On
position and the speed controller in the
O
position. After pressing
the
Soup
button, the blender starts working: first it blends the ingredients six times in pulses and then it
increases and decreases the speed to achieve perfect mixing. After 30 seconds, the blender switches off
automatically.
This program can be cancelled anytime during the operation by pressing the
Soup
button.
In case of insufficient mixing, repeat this function as described above.
PLEASE NOTE:
By turning the rotary speed controller while an automatic
Smoothie
,
Ice Cream
or
Soup
program is running,
the selected program is cancelled and the blender switches to the Continuous Speed Control mode.
OPERATING INSTRUCTIONS
CAUTION
Prior to using a new unit, wipe the surface with a wet cloth and wash the removable accessories in warm
water due to hygienic reasons.
The unit has a built-in safety catch. The motor can be switched on only if the accessories are properly
mounted. Do not bypass the safety mechanism!
Never leave the appliance unattended while it is running or connected to the mains.
Some parts may keep moving for a while immediately after the motor has been switched off and the
power cord disconnected from the socket. Wait until the accessories stop completely and only then
open the lid.
Using your blender
1. Place the Jar onto Blender Motor Base. Before operation,
recheck the Jar base is fixed well on the blender Motor
Base or not. If not, adjust a little bit direction of driving
shaft of Blade under Jar base for a easy insert into Motor
Driver Gear of Blender Motor Base.
2. Put the ingredient into Jar and then cover the lid back
3. Plug into the power source
4. Settle Mode or Stepless Speed SWITCH controls to start
the processing.
Note
: Blender only works when the switch knob is
started from O/off position. If blender could not work,
please turn the knob back to O/off position.
5. Ingredient could be added into Jar through Small cup in
the lid
6. Take away the Jar from Blender Motor Base only when
the motor is stop.
WARNING
Hot food mixes at the lowest speed, if necessary, add speed. Do not use smoothie, there is a risk of splashing
hot liquid from the container and scalding.
NOTICE
This smoothie blender is equipped with overload protection to ensure longer service life of the motor.
If the blender shuts down during the operation, do the following:
• Switch off the blender using the
On/Off
lever and let it cool down for approximately 15-20 minutes.
• Remove the vessel from the base and place it out of the base.
• Disconnect the power supply cable from the wall outlet.
• Turn the base upside down and press the
PRESS TO RESET
button located near the power supply cable
output (see Fig. 1).
• If the
PRESS TO RESET
button cannot be pressed in, let the blender cool down for approximately 20 more
minutes and then try to press the button again.
