EN
EN
49
48
SM 8000
SM 8000
• Turn the base back into the original position, plug the power
supply cable in the wall oulet, place the vessel back onto the
base, and continue blending.
CLEANING AND MAINTENANCE
1. Before cleaning remove the power cord from the socket.
2. Never immerse the housing with motor in water!
3. Do not use any sharp or abrasive detergents.
4. On
ly a damp rinsing cloth should be used to clean the outside
of the housing.
5. Components that have come into contact with food can be
cleaned in soapy water.
6. Allow the parts to dry thoroughly before reassembling the
device.
Figure 1
