Concept2 MZ3555bc, Manual

Page: 60 / 66

60
EN
MZ3555bc / MZ3555wh
APPLIANCE DIMENSIONS
DOOR OPENING DIRECTION CHANGE
Be careful not to pinch your fingers in the upper and lower hinges of the door when changing
the door opening direction.
1. Switch off the circuit breaker or remove the plug from the wall outlet. When disconnecting the appliance
from the wall outlet, never pull the power cord, grasp the plug end and disconnect it by removing it from the
receptacle.
2. If you have any food and drinks in the freezer door compartments, remove them.
3. Remove the top cover and remove the screws from the top hinge of the freezer (Fig. 2) and remove the top hinge.
During dismantling hold the door in a vertical position to prevent them from falling and subsequent damage.
Remove the freezer door and place it in a safe place.
4. Remove the freezer lower hinge screws (Fig. 3). Remove the lower door hinge and unscrew the two levelling feet.
5. Install the lower door hinge to the opposite side. Ensure that the screws are correctly positioned (Fig. 3) and fix
them. Screw in the levelling feet.
6. Place the door on the lower hinge and install the upper hinge. Ensure that the screws are correctly positioned
(Fig. 4) and fix them.
7. Put back the top cover of the freezer (Fig. 4).
8. Make sure that the freezer door closes properly.
845 mm