Concept2 MNV7760ds, Manual

Page: 146 / 154

146
EN
MNV7760ds
The detergent dispenser
cover cannot be closed
The dispenser is overfilled. Remove the excess amount of detergent.
The mechanism is blocked by
the detergent residues. Clean the closing mechanism of the detergent
dispenser.
Dishes are dirty
The dishes were not
arranged properly
See "Loading dishware".
The selected washing
program was not strong
enough
Select more intensive washing program.
Insufficient amount of
detergent
Use more detergent.
The arm is blocked by dishes
or food remains. Check the dishes and clean the spray arm if
needed.
It is possible the filter
is inserted improperly.
Blockage of the arms may
occur.
Clean or insert the filter properly. Clean the spray
arms (see "Cleaning the spray arms").
Stains on glass
Combination of soft water
and too much of detergents.
Use smaller amount of detergent and for washing
glasses select the shortest washing cycle if water
in your area is soft.
Black or grey stains on the
dishes
Aluminium cutlery has
touched the dishes during
the washing cycle.
Use a gentle abrasive agent to clean such stains.
Do not put this agent into the dishwasher!!!
Dishes are moist
Dishes were loaded
improperly
See „Loading dishware“.
Insufficient amount of rinse
aid
Use more rinse aid.
You unload the dishes too
soon.
Do not unload the dishes immediately after
the washing program is done. Open the door
slightly to allow the excess steam to escape. Start
unloading when the dishes are almost cold to the
touch. Always unload the lower rack first and then
the upper rack to prevent the excess water from
the upper rack flowing down onto the dishes in
the lower rack.
Wrong washing program
was selected
The short washing program is less effective than
the long programs and the temperature is also
lower. Select longer washing program.
Cutlery with wooden handle
Draining water from these is more difficult. This
type of cutlery is not suitable for washing in the
dishwasher.