Concept2 MNV7760ds, Manual

Page: 130 / 154

130
EN
MNV7760ds
LOADING THE RINSE AID
The rinse aid is used in the last stage of rinsing to prevent the drops of water from staying and drying out on the
dishes leaving undesirable stains on the dishes.
1. Open the appliance door.
2. Open the rinse aid dispenser as shown in Fig. 3.
3. Slowly pour the rinse aid into the dispenser (Fig. 4). The capacity of the empty dispenser is about 140 ml.
4. After filling close the rinse aid dispenser cover (Fig. 5).
If the indicator of the amount of the rinse aid lights up, you must refill the dispenser before starting a new washing
cycle!
Note:
• The rinse aid dispenser is located on the door next to the detergent dispenser.
• The appliance is designed to be used only with liquid rinse aids.
• If there is a spillage of the rinse aid, wipe it out using an absorbent cloth or run a short washing cycle to wash it
away.
Caution!
• Use only rinse aids designed for use in dishwashers. Never pour detergents into the rinse aid dispenser.
• Load the rinse aid before running the short washing cycle to wash away any spilled rinse aid residues and
prevent the risk of corrosion of the appliance interior.
Fig. 3
Fig. 4
Fig. 5