EN
Check the amount
of regenerative
salt
1. According to signalisation on the panel
Fill racks with
dishes
Put dishes cleared of large leftovers in racks
Select a program
Select the required program by pressing the „Program“ pushbutton
Program
Start the
dishwasher
Check whether the water tap is open; close the dishwasher door and press Start/
pause button
Program change
possibility
1. Press Start/pause button
2. Discontinue the running program by pressing the „P“ pushbutton for more than 3 seconds
3. Select and set up the newly required program by pressing the „P“ pushbutton
4. Check whether dishwashing detergents are in the container
5. Close the dishwasher door and press start/pause button
Forgotten
dishes insertion
possibility
1. Press Start/pause button
2. Insert forgotten dishes
3. Close the dishwasher door and press start/pause button
Power supply
failure
1. Select and set up the newly required program by pressing the „P“ pushbutton.
2. Carefully open the dishwasher door (danger of hot water/steam scalding)
3. Check whether dishwashing detergents are in the container
4. Close the dishwasher door; the program starts in 10 seconds
Once the program
is over, turn off
the dishwasher.
The program end is signalled acoustically Carefully open the dishwasher door
(danger of hot water/steam scalding); then turn the dishwasher off by pressing the
main switch
Final steps
Close the water supply tap; let dishes cool off for at least 15 minutes (danger of
burning by hot dishes); then remove dishes from the dishwasher
Jindřich Valenta – ELKO Valenta Czech Republic, Vysokomýtská 1800,
565 01 Choceň, Tel. +420 465 322 895, Fax: +420 465 473 304, www.my-concept.cz
ELKO Valenta – Slovakia, s.r.o., Hurbanova 1563/23, 911 01 Trenčín
Tel.: +421 326 583 465, Fax: +421 326 583 466, www.my-concept.sk
Elko Valenta Polska Sp. Z. o. o., Ostrowskiego 30, 53-238 Wroclaw
Tel.: +48 71 339 04 44, Fax: 71 339 04 14, www.my-concept.pl
Summary of Contents for MN 8560
Page 2: ......
