69
MN8560
EN
11. Press start/pause button (6) to turn on the dishwasher.
12. Once the program is over, the dishwasher signalises its end with a beep.
13. Turn the dishwasher off by pressing the main switch (5) and open the door.
CAUTION!
Be careful when opening the dishwasher. A large volume of steam might release when the door is opened.
13. Close the water mains tap.
16. Hot dishes are very fragile. It is recommended to wait for about 15 minutes before removing your dishes to let
them cool down.
17. Remove the dishes from the lower rack fi rst, then from the upper racks, to prevent water dripping from the dishes
placed above onto those below.
In case the selected program is to be changed:
a) If the program has not started yet, select another program or press the main switch pushbutton (5) – the dishwasher
turns off and the preset program is cleared from the memory.
b) If the program is already running, press Start/pause button (6) – the dishwasher switch to stand-by mode. Press
the program select button (3) for at least 3 seconds and the selected program will be erased from memory. Then you
can select new programme.
Note:
If you decide to change the selected program, check to see if there is any dishwashing detergent in the
container, or if it has already been used, and if required add more before starting a new program.
In case additional dishes are to be placed in the dishwasher when a program is already running
1. Press Start/pause button (6) to stop washing.
2. Open the dishwasher and add dishes.
3. Close the dishwasher.
4. Press Start/pause button (6) to start washing.
CAUTION!
Be highly careful when adding dishes into the dishwasher. A large volume of steam may be released, or hot water may
splash out when the door is opened. Hot water with a dishwashing detergent can be chemically aggressive when in
contact with skin or furniture.
MAINTENANCE AND CLEANING
Regular checking and maintenance of the dishwasher may prevent failures. Therefore, the dishwasher must be carefully
inspected from time to time.
For maintaining the perfect appearance of the dishwasher‘s internal chamber it is recommended to use a special
dishwasher washing agent at intervals of 4 to 6 months.
Overall dishwasher condition
• Check the washing chamber for grease and scale sediments. If there are sediments, fi ll the dishwashing detergent
container and run the dishwashing program at the highest temperature.
• Wipe door seals regularly with a wet dishcloth to remove sediment.
• Check the salt dosage indicator light, and refi ll the salt if needed.
• Check the rinse aid indicator light. Refi ll the rinse aid if needed.
Summary of Contents for MN 8560
Page 2: ......
