Concept2 LKR7460bel, Manual

Page: 78 / 98

78
EN
LKR7460ber / LKR7460bel
The power supply (AC) and voltage at the operating point must match with
the details on the name plate of the appliance (the name plate is located on
the inside left of the appliance).
• We do not accept responsibility for any damages that occur due to ungrounded
usage.
• Place your fridge freezer where it will not be exposed to direct sunlight.
• Your fridge freezer must never be used outdoors or exposed to rain.
• Your appliance must be at least 50 cm away from stoves, gas ovens and heater
cores, and at least 5 cm away from electrical ovens.
• If your fridge freezer is placed next to a deep freezer, there must be at least 2
cm between them to prevent humidity forming on the outer surface.
• Do not cover the body or top of fridge freezer with lace. This will affect the
performance of your fridge freezer.
• Clearance of at least 150 mm is required at the top of your appliance. Do not
place anything on top of your appliance.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).
• Before using your fridge freezer, wipe all parts with a solution of warm water
and a teaspoon of sodium bicarbonate. Then, rinse with clean water and dry.
Return all parts to the fridge freezer after cleaning.
• Use the adjustable front legs to make sure your appliance is level and stable.
You can adjust the legs by turning them in either direction. This must be done
before placing food in the appliance.
• Install the two plastic distance guides (the parts on the
black vanes -condenser- at the rear) by turning it 90°
(as shown in the figure) to prevent the condenser from
touching the wall.
• The distance between the appliance and back wall must
be a minimum of 75 mm.