96
97
KTV4444
KTV4444
CZ
CZ
When installing the appliance, follow these steps:
1. Remove all the packaging and marketing materials before first use.
2. The required dimensions of the cabinet for the installation are shown in Pic. 1. Due to effective air circulation the
appliance must be located according to the dimensions shown in pictures and the cabinet must be designed that
the air can circulate freely into the bottom part of the appliance. There must be at least 50 mm gap behind the
rear wall of the appliance when it is the appliance installed.
3. Insert the machine on the edge of the cabinet and pass the power cord through the rear wall of the cabinet so its
plug will be freely accessible after the installation.
4. Carefully insert the whole appliance into the cabinet at the chosen location. Be careful to avoid pinching the
power cord.
5. Fasten the appliance to the cabinet by screwing two screws into the holes in the front wall of the frame of the
appliance. Holes are visible after opening the oven door.
6. Plug the power cord into the wall outlet.
Disassembling
If you disassemble the appliance, it is important to follow the steps in the correct order:
1. First, unplug the power cord from the mains (pull the plug or switch off the circuit breaker).
2. Loosen the fastening screws.
3. Slide out the appliance while carefully pull the power cord.
TROUBLE SHOOTING
Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service.
Some of the malfunctions may be caused by improper use of the appliance.
The Installation and repair of an electrical appliance may only be performed by a qualified professional. Repairs and
manipulation with the appliance by an unauthorized person could be dangerous.
Defect description
Possible cause
Solution
The appliance does not work
Faulty circuit breaker
Check the circuit breaker in the
switchboard if it is in a working condition.
The power cord plug is not
plugged in the wall outlet.
Plug the power cord plug in the wall
outlet.
Electrical power supply failure.
Check if the lights in the kitchen are
working.
The appliance does not work.
Display shows a symbol .
Child lock is activated
Deactivate the child lock (see paragraph
Child lock).
Display shows a time 0:00
Electrical power supply failure.
Set the clock.
Microwave heating dos not work
The door is not completely closed
Check the oven door if there are any
impurities or food reminders.
Preparation of food using the
microwave heating takes too
long.
The selected microwave heating
power is too low
Set a higher microwave heating power
value.
The portion of food is large
Double the portion of the food = double
the heating time.
The food is colder than usual
Mix or turn over the food during the
heating process.
EN
The turntable plate squeaks or
rattles
Impurities in the area around the
turntable plate
Thoroughly clean the rollers and the
bottom of the appliance under the
turntable plate.
Specific functions or heating
power values cannot be set
Time, temperature or combined
heating function cannot be set.
Select a different function.
The display shows an error
message E1
Switching off function of the
temperature sensor has been
activated
Contact the service center.
The display shows an error
message E4
Switching off function of the
temperature sensor has been
activated
Contact the service center.
The display shows an error
message E11
Moisture occurs in the control
panel
Let the control panel dry out.
The display shows an error
message E17
The quick preheating function
failed
Contact the service center.
ENVIRONMENTAL PROTECTION
• Prefer recycling of packaging materials and old appliances.
• Package materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan:
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical
and electronic appliances (waste electrical and electronic equipment – WEEE). The symbol on the
product or its packaging indicates that this product may not be treated as household waste. It is
necessary to take it to a container park for the recycling of electrical and electronic equipment. By
ensuring the correct disposal of this appliance you will help prevent potential negative consequences
for the environment and human health, which could otherwise result from inappropriate disposal of
this product. Disposal must be performed in accordance to the regulations for waste disposal. For more
detailed information about recycling of this appliance see the authorized local office or service for
household waste disposal or the shop, where you purchased the appliance.
OCHRANA ŽIVOTNÍHO PROSTŘEDÍ
• Preferujte recyklaci obalových materiálů a starých spotřebičů.
• Krabice od spotřebiče může být dána do sběru tříděného odpadu.
• Plastové sáčky z polyetylénu (PE) odevzdejte do sběru materiálu k recyklaci.
Recyklace spotřebiče na konci jeho životnosti:
Symbol na výrobku nebo jeho balení udává, že tento výrobek nepatří do domácího odpadu. Je nutné odvézt
ho do sběrného místa pro recyklaci elektrického a elektronického zařízení. Zajištěním správné likvidace
tohoto výrobku pomůžete zabránit negativním důsledkům pro životní prostředí a lidské zdraví, které
by jinak byly způsobeny nevhodnou likvidací tohoto výrobku. Podrobnější informace o recyklaci tohoto
výrobku zjistíte u příslušného místního úřadu, služby pro likvidaci domovního odpadu nebo v obchodě, kde
jste výrobek zakoupili.
CZ
10
VA0010
SERVIS
Údržbu rozsáhlejšího charakteru nebo opravu, která vyžaduje zásah do vnitřních částí výrobku, musí provést
odborný servis.
EN
