92
93
KTV4444
KTV4444
CZ
CZ
Grill + Microwave heating
NO
Circular heating with a fan + Microwave heating
YES
Grill with a fan + Microwave heating
YES
Pizza + Microwave heating
YES
Setting the quick preheating function
1. Turn the knob (K1) to select desired heating function and the knob (K2) to set the temperature.
2. Press the button (2). Display shows a symbol .
3. Press the button (6) to confirm, then the heating process will start.
4. To cancel the preheating function, press the button (5) or (2).
5. You will hear a sound signal and a symbol will start to flash. Quick preheating function is done.
6. Place food in the appliance, set the desired function, time and temperature.
Note:
1. The microwave heating function is off during the quick preheating function.
2. The quick preheating function can be cancelled by opening the oven door.
Reminder function
This function can be set only when the appliance is in standby mode. This function helps you to remind a start of
heating at a certain time, which can be set from 0:01 minutes to 5:00 hours. Setting the reminder function goes as
follows:
1. Press the button (4) in standby mode.
2. Turn the knob (K2) to set the time for the reminder function.
3. Press the button (6) to confirm. The time will start counting down.
Note:
1. You will hear a quintuple sound signal after the countdown is done.
2. During setting the reminder function you can cancel it by pressing the button (5).
3. To cancel the set time for the reminder function, press the button (5).
Child lock function
1. To lock the appliance press and hold the button (2) for 3 seconds in a standby mode.
2. You will hear a sound signal and the display will show a symbol , which indicates locking the appliance.
3. To unlock the appliance press and hold the button (2) for 3 seconds in a standby mode.
4. You will hear a sound signal and the symbol will disappear.
Note:
1. When the child lock s activated the appliance does not respond to handling.
2. Child lock can only be activated only in standby mode. When any of the heating functions is selected the child
lock cannot be activated.
Automatic turning on/off the lightning of the appliance
The interior lights automatically turn on when the door is opened. The interior lights automatically turn off when the
door is closed. During the heating process and when it is paused the interior lights are on.
EN
Cooling ventilator
The ventilator is located on top of the appliance and
provides circulation of a cool air inside the furniture.
The ventilator turns on automatically the appliance
is operating. When the heating process is done or it
is paused the cooling ventilator is still on until the
temperature of the appliance reaches the safe limit.
Caution!
Do not block the ventilation openings. It may lead to
overheating and subsequent damage to the appliance.
ENERGY SAVING TIPS
1. Preheat the appliance to the desired temperature, which is specified in the recipe or according to the tables
contained in this manual.
2. For baking use dark, black varnished or enamelled bakeware. Bakeware absorbs the heat very well.
3. Do not open the oven door during the heating process too often.
4. If the oven has been heated long enough you can turn off the appliance 10 minutes before finishing and use the
residual heat to finish the preparation of food.
CLEANING AND MAINTENANCE
Clean the appliance regularly to maintain a good appearance and reliability of the appliance. The modern design
simplifies the maintenance to a minimum. Parts of the appliance which come in contact with food need to be
cleaned regularly.
• Disconnect the power cord from the wall outlet or switch off the circuit breaker of the appliance before cleaning
and maintenance.
• The inside of the appliance should not be hot, wait until the inside cools a little bit - the cleaning is easier when
the inside is slightly warm.
• To clean the outside of the appliance use damp cloth, soft brush or fine sponge, then wipe it dry.
• To clean the interior of the appliance use damp cloth, soft brush or sponge. You can use warm water with a non-
aggressive detergent when it is needed.
• Do not use abrasive cleaners or sharp metal scrapers to clean the glass door screen of the appliance, as they may
scratch the surface or you might break the glass.
• Never leave aggressive or acidic substances (lemon juice, vinegar) on the enamelled, varnished or stainless parts.
• Do not use high-pressure cleaners or steam jets.
• Glass pan, low grill stand and grill can be washed in a dishwasher.
• Allow all surfaces to dry properly before next use.
Surface
Detergents
The front of the
appliance
Hot soapy water:
Wash it with a damp cloth and then wipe it dry with a clean dry cloth. Do not use
metal or glass scrapers.
The front part of
the appliance with
a stainless steel
Hot soapy water:
Wash it with a damp cloth and then wipe it dry with a clean dry cloth. Remove all
stains of scale, grease, starch protein (e.g. egg white) as soon as possible. These
residues may cause corrosion. Cleaners designed for stainless steel can be purchased
in specialized stores. Do not use metal or glass scrapers.
VENTILATION HOLES
EN
